Posted on

The Lawrence Street House – Schematic Pt 2

As we started the design, we looked at our relationships of rooms to each other (from our notebook), the aspects of the rooms we wanted (the den needed to also double as a guest bedroom) and the relationships of all of this to the outdoor living areas of our lot and our relationship to the neighborhood.

You really can’t initially take just one thing and focus on that. Good design needs to be comprehensive. We’re going for LEED certification (targeting Platinum again!) and even LEED recognizes this. I think I’ve mentioned before in this blog (or my other blog): everything is connected. And that applies to the design, too. How and where we place the kitchen affects the rest of the house and affects how I barbecue in the summer months. The shape of the house plan affects the rooflines, which affects the ability to install solar panels. The location and shape of the garage affects the location and shape of the rest of the house. Where the basic “mass” of the house sits affects whether or not our patios get good sun (important to us) or are constantly in the shade (not good in Oregon).
We start pen on paper, freehand, rough and only generally to scale. This first part is more organizational. What rooms are generally where and how the overall flow and circulation might work.
The lot is narrow (60 feet) and, with the interior yard setback (5 feet) and the street setback (10 feet), we only have 45 feet to work with. The one aspect of our design I will focus on today is the garage and its relationship to the house and its shape. As has been the case for many years, our mindset is a 2- or 3-car garage. That’s been our culture. We, obviously, aren’t thinking a 3-car garage here, but we have settled out that even with our walking and bike riding, we want space for 2 cars.
In the normal mode of thinking (which we’re trying to change), that’s at a minimum 20 by 20 foot box. And with only a 45 foot wide building area, that can dominate the design. So how to get around that? Even with our alley access, that size box fills up our yard area. So do we want yard or garage? Can we have both?
This calls for thinking outside the box (pun intended). Appropriate, since the garage is usually a box. So we thought, could our lifestyle accept an end-to-end arrangement for the garage? Then the “box” is more like 12 feet by 40 feet (and that sets up visual issues we’ll address later), we have a smaller garage door, which lessens the auto impact, even though it’s facing the alley, and seems like it will fit our lifestyle.
The picture above is our first iteration (north is up — north is always up). The house basically is at the southwest corner of the lot, garage along the north and accessory dwelling unit at the southeast. This leaves a nice south and east facing area for patios. This gives us a more “square” arrangement for the heated part of the house (more energy and material efficient) and a much nicer yard area. The rooflines seem like they will work well this way, so we’re going to develop this a little further.
Posted on

The Lawrence Street House – Site Analysis

I know this wasn’t a one word title; sorry. Before we start designing (and the excitement of getting started builds, so there’s still that temptation. Resist!), we take a really good look at the site. We call this our site analysis. Yeah, not very creative, but accurate.

We look at a number of things. The topography of the land (it’s mostly flat, with a depression where the previous house was), the immediately surrounding features: neighboring houses, the big overgrown apple tree, power lines, utilities, and the gravel alley to name a few. How the house would relate to the surrounding neighborhood.
As I’ve mentioned, we live in a society of garage door openers and not knowing our neighbors. Our lot is unique since it’s on 15th. I talked in an earlier post how 15th is also a major bike street. In fact, we’ve noticed there is probably more bike traffic on 15th than cars. We like that. There are also more pedestrians along 15th than many suburban streets. We like that, too.
So we’re filing away the desire to not turn our backs on the street. We are going to be faced with wanting an outdoor living area for our home that has some privacy, but doesn’t turn our back on the rest of the neighborhood. We have this philosophy that our entire society would be just a little better if we related to our neighbors a little more. For us, it’s that spiritual aspect of “loving your neighbor”.
We also have a relatively non-descript four-plex to the west, across Lawrence, some nicer houses across 15th to the south and a still-vacant lot across the alley to the east. Uly’s Tamale Cart parks right along 15th (we’d like to meet Uly: anyone know him?). We want to downplay the garage, so we will be taking access to the garage off the alley. We absolutely want to take advantage of solar (patio, photovoltaic and hot water). Since we’re on the corner, we’d kind of like it if our front door related to the corner. And we have the ability to increase density on our urban lot by building what’s called an accessory dwelling unit (ADU).
ADUs are a secondary house on the same lot that could be a place for elderly parents to live or a rental house. An ADU can be no larger than 800 square feet and we want to take advantage of that for a several reasons: our lot is large (9,000 sq ft) and this is a better use of land, we’ll have a place for elderly parents if needed, and if not, we’ll have the ability for rental income as we head into retirement.
You can see it’s important to think through and evaluate these things BEFORE you start designing. It saves changes (or mistakes) later.
Posted on

The Lawrence Street House – Schematic Pt 1

We’ve started the design. After we synthesize the notebook (it’s good to organize your thoughts, even when designing your own home), we started sketching. I plotted out a scale site plan with the surrounding houses, trees, streets, etc.

Making note of the site analysis information and thinking about the factors that arise in that process, we can actually start designing the house. Finally. Most times, we as architects meet with our client and go over their notebook. We try to “get into their head” as to what they want, what the pictures and descriptions they’ve compiled actually mean. If they’ve done a good, comprehensive job on this, our job as an architect is much easier.
We have also owned this lot since last summer. So we have taken bike rides past our lot, stopped and just savored the neighborhood. We’ve eaten at our favorite restaurant (just three blocks away) and walked around the neighborhood. We’ve become intimately familiar with this piece of ground near downtown.
I’m also in a bit of a unique situation since this is my house and my wife and I are the clients. So this process is a little different. As I mentioned in my earlier “programming” post, my wife has really good ideas — some I haven’t thought of. So when the time came to sit down with pen and paper, she sat with me, too.
And, yes, this techno-geek-early-adopter still designs with pen on paper. As much as I’d like to go paperless, and I do in many areas, when it comes to the free flow of ideas in an initial design of a house, pen and paper is still the best.
We sat down for an uninterrupted afternoon, looked through our notebook again, talked about the surrounding aspects of the lot we’ve now owned for about 6 months and started.
Posted on

The Lawrence Street House – Programming

I’m trying to title each of these posts with a one-word summary. Site. Beginnings. You know, try to keep it simple. After all, this is thesimpleHOUSE.
So this next step in our process is called “programming”. I tried to look for a better word, because programming is long, sounds technical and doesn’t quite have the sexiness of a word like “beginnings”. But there really isn’t a better word, so I stayed with that.

Programming is where we take the information from a client (in this case, myself and my wife) and help them organize it into a framework where we can move into a schematic design (for starters) of their home.
You would think since I’m an architect and am designing my own home for myself and my wife (who I’ve been happily married to for almost three decades), we could dispense with the programming and just start designing. Well, that was the temptation.
But I’m so convinced of our process and the years of experience with it that we did it, too. My wife and I sat down and “programmed” our new home. The first picture above is one aspect of this process. We have a matrix where we link all the rooms and areas of our home and decide what kind of relationship we want between them. We color-code this with “direct”, “indirect” or “no relationship”. This is the first part of the process.
The second part (represented by the second picture) is going room by room and listing ideas, thoughts and dreams specific to that room. Downloading images and taking pictures of things we like are also incorporated into a page for each room. Any furniture we intend to keep (“reuse” is one of the three “R”s) is measured and listed at the bottom of the page for that room.
After all that is compiled, it creates a very comprehensive basis for starting a design. The other benefit it does is it gets the client (in this case me and my wife) talking and communicating about what we would like. It can be (and was for us) a wonderful process of thoughts, ideas and dreams. And I discovered even non-architects (my wife) often have really good ideas I haven’t thought of. And that’s how we grow and learn and get better at what we do.
Posted on

Grouping Your Trips

Depending on how you drive or get around, you might be able to “halve” your gasoline consumption. I used to think that riding my bike or the bus to work would save a majority of my gasoline consumption. But I recently learned that the majority of our VMTs (vehicle miles traveled) are NOT going to and from work. They are in the day-to-day trips to the grocery store, school, restaurants and the like.

Trips to and from work only account for about 30% to 40% of our VMTs. Now I’m not saying that riding my bike to work doesn’t have an impact or isn’t substantial, after all, 30% to 40% is still a pretty big chunk of consumption. What I’m saying is trips to and from work are kind of a given. Five days a week, same times of day and mostly incoming and outgoing with little variety or opportunity is more difficult to reduce than the trip to the grocery store, back home and, oops, I need to go here, then there.

Plan out your trips. If you need to go by the bank, try and group it with another trip in that general direction. If we only grouped two trips instead of just one, we would be well on our way to “halving” it all.

Posted on

The Lawrence Street House – Site

I know this picture is probably a bit hard for you to read and see. But that isn’t really the most relevant part of this post. As my wife and I were looking for a lot to build on, there were some factors that affected our decision.

First, we like to ride bikes. We’re not the racing bike sponsored spandex riders, but what I call casual bikers. That means we like to ride around town, to a restaurant to eat, downtown for a chocolate latte, etc. I also like to ride to work during the summer.
So one factor was bikability. And the lot we found is right on 15th Avenue, which is one of Eugene’s major bike routes.
Another factor is, in the current vernacular, walkability. LEED considers the walkability of a location and whether or not you are within a 1/4 mile or 1/2 mile of major amenities. A good resource is a website called WalkScore (http://www.walkscore.com). you can enter your address and it will give you a score on a scale of 0 to 100. The higher the better. Our lot scored an 85, or “Very Walkable”.
The reason this is important (some of you were asking that, I’m sure) is that it reduces our dependence on a car. This has numerous effects: less emissions and pollution, lower money outlay (less gas purchases, maintenance, etc), and better health (walking or biking is good exercise, so you’re healthier and will probably spend less money and time at the doctor and buying medications). You see, everything is connected. And, since this is an urban infill lot, our City won’t have to spend money extending services to the suburbs because of our home construction: it’s all already there.
Plus, if you’re out walking or biking, you have a better connect with people. You might even get into a conversation. And that can only be good. We live in a society of air-conditioned homes, sealed automobiles and garage door openers. Many of us don’t know our neighbors.
So before we even started designing our new home, we carefully considered our site location.
Posted on

Vinegar and Baking Soda

Household chemicals. Probably some of the most dangerous things we have around. Have you ever really looked at the labels on some of that stuff? My wife and I have a rule (seems like we have lots of rules, huh?) that relates to food and is making its way into many aspects of our lives. And that rule is we look at the ingredients in our food or in our cleaning supplies or household items such as toothpaste and if we can’t spell it or pronounce it, we try to avoid it.
This especially can apply to cleaning supplies. From window and countertop cleaners to scrubbing cleansers, we typically use products containing things such as ethylene glycol mono butyl ether (I think that’s just one ingredient with five words) and, here’s a good one: n-Alkyl dimethyl Benzyl ammonium chlorides. And, to top it all off, there are warning labels to seek medical attention if you get this in your eyes or on your skin.
And we’re cleaning our kitchen countertops with this stuff? The same countertop we prepare our food on? Does any of this seem even a little bit weird to you?
For several years, we have been using what I call “natural” cleaning supplies. And, no, we don’t buy the latest “green” cleaning product (although some are very good). For 99% of our cleaning, we have been using white vinegar in a 50-50 mix with water and baking soda.
We have cotton cleaning towels and we have an old spray bottle we’ve reused and filled with our vinegar solution. This works on bathroom and kitchen sinks, countertops, mirrors, pretty much everything. For scrubbing and more difficult areas (like our stainless steel sinks), we use baking soda and a little water, make a paste, get an old toothbrush and we’re set.
There have been few areas of our house that we haven’t been able to clean with these products. And the big advantages are they are cheap (A gallon of white vinegar costs just under $3 around here and a large box of baking soda is about the same), and we don’t worry using them around the kitchen counters and our food. In fact, there are some pretty good recipes using vinegar and others using baking soda. Hmmm…

But probably one of the best compliments we’ve had, though, is when my mom called me the other day and asked what we used to clean our house, because “it always looks so nice”. Oh yeah.
Posted on

The Lawrence Street House – Beginnings

I know it’s been a while since my last blog, so I’ll bring those of you who are new to thesimpleHOUSE up to date. Our kids are grown. We raised them in a 2,750 sq ft house that worked really well as they passed through their teen years and into adulthood. But now our daughter is married (they had their second anniversary in August) and our son just graduated from college and will be moving out soon. So we’re very close to being two people in what is now seeming to be a very large house. So last summer, after much searching, we found a wonderful urban infill lot in downtown Eugene, Oregon (our home town). We have the 2,750 sq ft house on the market for sale (let me know if you’re interested; it’s nice and doesn’t quite qualify as a McMansion) and are starting the design process. We recently did a LEED Platinum house (theSAGE in previous posts) that pulled out all the stops on sustainability. And you know, it wasn’t really that hard to do. So armed with a desire to be in something around 1,600 square feet, within walking distance of most amenities and that “itch” that I, as an architect, get about every decade, we’re designing another home. Stay tuned.

Posted on

CFLs and LEDs

In addition to the thirty second rule, we went through our house and replaced quite a few of our light bulbs with CFLs (compact fluorescents) ad some LED (light emitting diodes). We started with the exterior porch lights. This was because we leave our porch lights on all night for security. And, since we live in a house that sits on a corner, with three bollard lights, two porch lights and four “over the door” lights, we had some serious wattage going on.
Originally, we had 60 watt bulbs in our three bollards, 100 watt bulbs in our two porch lights and 50 watt bulbs in our over the door lights. That was a total of 580 watts going all night!
Well, we changed out the 60s and 100s for 11 watt CFLs and the 50s for 3.7 watt LEDS. That dropped our wattage from 580 to just under 70 watts. Not only do they last longer, but they put out almost as much light (except for the LEDs — they’re quite a bit dimmer and they’re expen$ive!).
But they all work fine for security. And, based on this success, I’m going through the rest of the house and replacing bulbs where I can (we have a lot of recessed can incandescents on dimmers, so it’s slow going). I’ve started with closets and am working my way through the house.
Consider CFLs or LEDs where you can.